Husqvarna Redi Lock Diamond PCD Grinding Disc for Epoxy Flooring

Husqvarna grinding diamonds are used on Redi-Lock system plate. with a bar on the back  1.9 PCDs 2.Removing epoxy,glue on the surface.  3.This kind of grinding aggressive removal tool for removal of coatings, mastics or rough concrete. 

5 Dot HTC Resin For HTC Quick Change Plate

Grit:50-3000# Use dry Specifically for polishing after metal.

Backer Pad for Lavina Grinder to Fit 3'' Velcro Diamonds

The backer pads are hook Velcro backed, they accept polishing pads with Velcro loop backed. We have rigid backer pads made from Bakelite, Flexible backer pads made from rubber, extremely flexible backer pads made from supper quality rubber . The backer pads are ideally suited for Lavina Floor Grinder. Size:3"

Double Arrow Segments Diamond Grinding Disc for HTC Floor Grinder

HTC's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. HTC has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.   Double Arrow Segments Diamond Grinding Disc for HTC Floor Grinder These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#

Diamond Small Cutting Blade

The small cutting blade is for general use in various stones. Designed for use on angle grinders, it can be used for straight cutting, flush cutting, grinding, edge grinding and shaping a variety of building materials including stone, marble, tile and granite. Shown with 5/8"-11 and M14 adapter which is included with blade. Available Size: 4''/100mm 4.5''/115mm 5''/125mm 6''/150mm 7''/180mm 9''/230mm

230mm Bush Hammer Plates for HTC Floor Grinder

230mm Bush Hammer Plates for HTC Floor Grinder   BUSH-HAMMER is a special tool that can be easily attached to floor machines to bush-hammer the floor.   APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.   230mm Bush Hammer Plates for HTC Floor Grinder Diameter: 230mm Bush Hammered Rollers:3 Rollers     Grains NO.: 45 pieces Application: grinding and polishing concrete, terrazzo and other stone. Fitted to HTC grinders and others' floor grinders. Sizes and connection types can be made according to clients' requirement.