5 step wet polishing pads (5SP_03)

5 step wet  polishing pads(5SP_03) Delivery Time：7-12 days  characteristic: used for marble and granite processing, no need water cooling, good safety and definition.     5 step wet polishing pads DM05 Grit 1# 2# 3# 4# 5# Dianeter 3" 4" 5" 80mm, 100mm,125mm

aaaaaaaaaaaaa

Sintered Eased Router Bits Shape A 20mm (3/4'')

  Delivery Time：7-12 days 20cm, 30cm, 40cm avaible. POS 0: Segmented POS 1-3: Continuous POS 4-7: Resin Router Bit / Profile Wheel is for Portable Router Edge Profiling Machine (M8 / M10 Adaptors).   Shape A Roundover / Eased, 3/4” (2cm), for granite slab edge profiling, marble slab edge profiling

Diamond Segment for Cutting Granite & Marble (DS06)

Universal dimension segments for single blades, multi-blades, frame sawa, coer drills, special shape cutters, etc. Other soecifcations can be ordered by customers. Because of high cost of steel core(steel boby), we normally reuse steel core several times and we also supply loose segment to our customers. D(mm) Core thickness(mm) Segment No. Segment dimension L×W×H(mm) 900 5.0 64 24×6.6/6.2×12(20) 1000 5.0 70 24×6.2/6.8×12(20) 1200 5.5 80 24×7.0/7.6×12(20) 1300 6.0 88 24×7.4/8.0×12(20) 1400 6.5 96 24×7.6/8.2×12(20) 1600 6.5 108/104 24×8.4/9.0×12(20) 1800 7.0 120 24×9.6/10.4×12(20) 2000 8.0 128 24×9.8/10.6×12(20) 2200 8.5 136 24×10.0/10.6×15(20) 2500 9.5 140 24×10.5/11.5×15(20) 3000 10 160 24×12/13×25(30)

5 Step Dry Diamond Polishing Pads

 The 5 Step Dry Diamond Polishing System is the advantage you need in this competitive market. Polishes: Granite Marble

Common Carving Tools (CCT01)

Designed for carving a wide range of ultra hard to soft material into intricate shapes. The diamond is all the way through cutting tip for maximum efficiency and superior long life. Unlike electroplated diamond carving points, metal bond carving points will continue to work as long as portion of the head still remains. Designed for use with all popular hand held machines & must be used with coolant. USED  ON: Hand  Piece  Drills, Cordless Drills, & Other Equipment (must be used between 9,000 to 35,000 RPM's (do not exceed 35,000 RPM) APPLICATION: 1)Glass / Quartz 2)Advanced Ceramics  3)Natural Stone & Gemstone     HOW TO ORDER indicate tool number desired (each diamond carving point is identified by number next to it below) indicate materials used on indicate diamond size desired (we can make a recommendation based on materials you are working with) indicate desired shank size. Standard is 2.35mm (other shank sizes such as 1/8" (3.2mm) and 1/4" (6.2mm) are available upon request Please note minimum order for these diamond carving points is $100 USD  Delivery Time：7-12 days Product Name Size Shank Diameter Diamon Mounted Points  3cm 30pc/set