Two Segment Bars Trapezoid Concrete Grinding Segments(White)

trapezoids are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in double bar and single bar segment design. We offer four bonds soft, medium, and hard. Grinding plate fit on Huaqvarna machine or other concrete floor grinders. Grit:16#, 30/40#, 60/80#, 120/150# Segment size:40x10x10mm or 40x12x12mm

Bush Hammering Rollers With Support

 This kind of bush hammering rollers with support is very popular in Australia and USA. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Inner hole: 12mm   Outer hole:45mm   Grain No. : 45

HTC Floor Grinding Diamonds

HTC floor grinding diamonds are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. We offer these diamonds in vary segment style: three fans, double bars, single bar, rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate fit on HTC machine   Grit:16#, 30/40#, 60/80#, 120/150#

High frequency welding marble blades

High frequency welding marble blades

E30 Bevel Shape Router Bits Pos 0 Segmented

Use Position 0 Segment Router Bit:Profile Wheel for rough shaping and grinding Use Position 1 and Position 2 Sintered Router Bits: Profile Wheels for fine grinding and shaping Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits: Profile Wheels for final polishing   Connect shank can be M8, M10(inner thread). Usually they are applied on the stone edge profiling grinders.

concrete bush hammer

concrete bush hammer 1.Pin:45 2.Perfect surface fabricating 3.With Support 4. Can sell the roller seperate   Application 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.