Double Diamond Concrete Grinding Abrasive Shoes
Name:Double Diamond Concrete Grinding Abrasive Shoes Grit:16-30/40-60/80-100/120-200-400# Bond:soft,medium,hard soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability. Application: Terrazzo, Concrete,Granite,and Marble,etc 1) High gloss finishes in very short time 2) Never mark the stone and burns the surface of the stone 3) Bright clear light and never fade 4) Different granularities and sizes as requested 5) Competitive price and superior quality 6) Beautiful package and fast delivery 7) Excellent service Time is money, and choosing the correct diamond tool for a job can save you a lot of time. Start by choosing a professional supplier. Then you can always get qualified help if something does not work as you expect. Remember, price and quality tend to go together. A low-cost tool of mediocre quality is rarely a good investment if you are going to use the tool professionally.
Diamond grinding PCD tools for epoxy remove with 9mm
Diamond grinding PCD tools for epoxy remove with 9mm PCD tools can run up to 10 times faster than solid carbide tools when at their peak efficiency, resulting in higher feed rates and reduced cycle time. PCD tooling is much more accurate and produces tighter tolerances than solid carbide tools. Secondary operations like grinding and deburring can severely hurt your bottom line, costing a lot of time, energy and money. With PCD tooling, you can finish more parts in less time while improving quality and accuracy.PCD tools have the ability to provide excellent surface finishes without the need for secondary operations. Without the need for these operations,manufacturers can save a significant amount of time and money, while still providing the same quality. Detal: Fitted in 9mm traps PCD direction: right or left Application: for remove epoxy Benefits: 1.PCD Toling Provides High-Speed Performance 2.Tighter Tolerances 3.Longer Life Span/More Consistent Results 4.Better Surface Finish Achieved 5.Material Versatility
Stone Foam Backed Hand Polishing Pads
Stone Foam Backed Hand Polishing Pads Foam backed hand polishing pads, the size is 90x55mm. Used to perform light on-site polishing or recovering of scratches and other hand polishing jobs. Widely used for smoothing out edges of glass. Detail: Size:90*55mm Material: Foam Usage: wet Grit: 30# 60# 120# 220# 400# 800# 1500# 3000# Application: Polishing for Granite,marble ,engineered stone,glass and concrete .
Scanmaskin Diamond PCD disc for floor remove
Scanmaskin Diamond PCD disc for floor remove PCD tools can run up to 10 times faster than solid carbide tools when at their peak efficiency, resulting in higher feed rates and reduced cycle time. PCD tooling is much more accurate and produces tighter tolerances than solid carbide tools. Secondary operations like grinding and deburring can severely hurt your bottom line, costing a lot of time, energy and money. With PCD tooling, you can finish more parts in less time while improving quality and accuracy.PCD tools have the ability to provide excellent surface finishes without the need for secondary operations. Without the need for these operations,manufacturers can save a significant amount of time and money, while still providing the same quality. Detal: Fitted in Scanmaskin grinder PCD direction: right or left Application: for remove epoxy Benefits: 1.PCD Toling Provides High-Speed Performance 2.Tighter Tolerances 3.Longer Life Span/More Consistent Results 4.Better Surface Finish Achieved 5.Material Versatility
White color diamond grinding cup wheels
White color diamond grinding cup wheels Diamond grinding cup wheels are very aggressive and open quicker than standard metal bond diamonds. It is designed for grinding concrete,Terrazzo, hard granite, marble, engineered stone, etc They are also good choice if you would like to generate a structured surface with good adhesiveness when casting a floor, no matter if its on top of screed or concrete. Detail: Size:4/5/7 inch etc. Grit: 16-30-60-80-100-150-200-300-400# Bond: Soft-medium-hard Abro:5/8''-11 or 22.23mm,M14,19mm Fitted in: Grinder machineApplication: for grinding concrete,stone,granite, concrete floors Advantage: 1) Specification is complete and varied. With different type and size meet many customer's needs 2) Good balance assures excellent grinding effect 3) Never mark the stone and burns the surface of the stone 4) Good balance assures excellent grinding effect 5) Long lifespan and stable performance 6) Competitive price and superior quality 7) High Working Efficiency 8) Excellent service
180mm Husqvarna Quick Change Plates
180mm Husqvarna Quick Change Plates This easy and quick tool change system can use universal diamond tools. It has a user-friendly design to change tools. It keeps solid machine condition by no impact and the strong magnets hold the metal diamonds in place. You can use it under your machine and grind to the nearest wall. Detail: Diameter: 180mm Fitted in Husqvarna grinder With 3 grinding disc Features: 1) Floor adaptor type 2) Back up pad made of metal 3) For connecting with the Diamonds 4) Use on floor machine Advantages Time saving and user-friendly system. No possibility of disconnection of the wing during heavy duty operation or transportation. No damage to the diamond segments because there’s no need to use tools.