Concrete Grinding Diamond Segment For Werkmaster

Concrete Grinding Diamond Segment For Werkmaster Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft   This tool is made to help remove and prep for thick or thin coatings, from epoxies to glues and paints, with a very quick turn around time. It's a general metal grinding tool that works all around for faster stone exposure. It will not leave deep scratches like a PCD but will prepare the surface all while removing the coating. The life of this product is quite impressive as well.

Ride on and walk behind power trowel and swing machine polishing pad

Ride on and walk behind power trowel and swing machine polishing pad Machine: Ride-on and behind power trowel and swing machine=Compatibility All the power trowel on the market Hardness of concrete:3500spi Size:3inch/80mm Grit:30-50-100-200-400-800-1500-3000# Thickness:12mm Usage:wet Connection:Patended clip Speed:500-1000rpm Package:6pcs/box Recommended use: Use on power trowelled or polished concrete floors Make sure concrete is clean and free of bolts or other rough things

ASL Double Button METAL DIAMOND GRINDING PADS

ASL Double Button METAL DIAMOND GRINDING PADS Choose between one or two segments (buttons or bars) to control the speed and aggressiveness of the cut. Double button / bar diamond tools are designed for heavier grinding machines, and are not recommended for grinders smaller than 25 inches. Single button / bar diamond tools are designed for lighter machines, or where aggressive stock removal is required. We recommend using single-segment diamonds for the first step even with heavier machines for faster opening of the concrete. Best for Prepping Polishing Projects Leaves Less Scratches. Connection: 3x9mm Grinder: ASL/ Xingyi Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft  

Polycrystalline Diamond PCD

Polycrystalline Diamond PCD PCD coating PCD (Poly – Crystalline – Diamond) is, unlike single crystalline diamond, produced synthetically by sintering together many (Poly) diamond particles, usually in the size of 2 to 30 microns of a meter, with a metal binder (usually Cobalt) at high temperature and high pressure. The rate is 90-95% diamond particles and the rest is Cobalt. Polycrystalline Diamond (PCD) is diamond grit that has been fused together under high-pressure, high-temperature conditions in the presence of a catalytic metal. The extreme hardness, wear resistance, and thermal conductivity of diamond make it an ideal material for the cutting tools manufacturing.  

Triangular Grinding Pads for Oscillating Tools

Triangular Grinding Pads for Oscillating Tools Triangular Diamond Polishing Pads can be used for wet polishing or dry polishing, are made from the finest grade diamond and resin bond matrix, and use an ultra-high quality hook and loop backing. These triangle pads allow you to polish installed stone corners where a round pad cannot access. An occasional spritz of water on the stone from a spray bottle will increase pad life, but they can be used dry as well.

Edge System Edge Kit Stand Grinder Unit

Edge System Edge Kit Stand Grinder Unit Features: Grind or polish tightly against any surface Single Speed and Variable speed control box Equipped with high impact dust shroud Equipped with LED Lighting Makita grinder GA7021 or Metabo grinder W24-180 Optional Edge Kit Applications: for concrete floors surface preparation, paint removal grinding, levelling, smoothing removal of light glue and mastics, cleaning              Optional model uses polycrystalline diamond                                        cup wheels             Equipment Specifications                  Working Width:  7"             Height:  27-41"       Power:  110 Volts, 15 A    Length: 32-51"                Weight: 55-70 lbs               Width:  8", 15.5"