Terrco Diamond Grinding Polishing Plug for flooring

Terrco Diamond Grinding Polishing Plug for flooring This arrow shape segment metal grinding disc is used for aggressive removal applications. The wide gaps between segments offer more of a cutting edge and will not load or gum up as much. The arrow shape is perfect for all coatings such as epoxy, urethane paint, mastic and other similar coatings. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.

Diamond Concrete Polishing Pads (DMY01)

This type of floor polishing pad is special used for concrete, marble, granite, travrtine and other floor material polishing. Color can be choosen. With long lifetime and more aggressive removal ability. Velcro backed. for concrete floor grinding machine like Klindex and husqvarna etc. Available Size: 4" Grit: 50#  100#  200# 400# 800# 1500# 3000#

Wermaster Rhombus Segments Grinding Diamond with 2 Pins

 New design double rhombus segments on 2 Pins metal body.  Specification: 1.Grit:16#-200# 2.Soft,Medium,Hard Bond, also make very soft and very hard bonds. 3.2 pins connection type to Werkmaster floor system plate 4.Renovate your floor clearer.

XRC High Performance Resin Polishing Rings (DMY27)

This kind of polishing rings are designed to polish edges on concrete floors after they have been grinded and honed with the 3N Copper Rings. This special bond will produce a high gloss shine on concrete. For dry applications only! Size:7'' Grit:50-3000#  

6 segs metal diamond floor grinding pads DMY38

This kind of  6 segment metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:Velcro back or 3 thread holes, or with 1 pin/post Bond:hard,soft,medium Grit:16#-400#

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.