Trapezoid Metal bond PCD Pad for Diamatic Grinder

Trapezoid Metal bond PCD Pad for Diamatic Grinder For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.  

Diamond Grinding Block for HTC Floor Grinder

 HTC grinding diamond segments are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments .    We offer three bonds soft, medium, and hard.   Grinding plate fitted on HTC grinder machines.   Grit:16#, 30/40#, 60/80#, 120/150#

PCD with bar Lavina concrete grinding shoes

PCD with bar Lavina concrete grinding shoes Our specially formulated grade of PCD with bar Lavina concrete grinding shoes ensure maximum wear and productivity for aggressive removal of hard-to-remove coatings, adhesives and screeds. Designed for use on Lavina machines . Other Lavina tools www.stonediamondtool.com/productsView-30_Grit_Super_Soft_Bond_Lavina_x_Metal_Grinding_Pad-1164.html www.stonediamondtool.com/productsView-Lavina_double_segments_diamond_metal_bond_grinding_pads_for_super_hard_concrete-1192.html www.stonediamondtool.com/productsView-Single_Arrow_Segment_Concrete_Grinding_Shoes_for_Lavina_x_series-1280.html      

z shape segment trap diamond

z shape segment trap diamond Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit We can also make it for concrete floor. Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.   Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.     25 Grit Medium Bond Double Rhomus Segment Diamond Traps   These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish  

240mm Diamatic Bush Hammer Plate

BUSH-HAMMER is a special tool that can be easily attached to our machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Bush Hammered Plate with 3 Rollers Diameter:240mm Bush Hammered Rollers:3 Rollers     Grains NO.: 45 tips Application: grinding and polishing concrete, terrazzo and other stone. Fitted to Diamatic grinders. Sizes and connection types can be made according to clients' requirement.  

4 Segments Diamond Grinding Plate for Terrco Floor Grinder

4 Segments Diamond Grinding Plate for Terrco Floor Grinder Application : Terrco Grinder Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.     These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#