Diamond Segments For HTC

Specification: 1.Grit:16#,18/20#,30/40#,60/80#,120/150# 2.Soft,Medium,Hard Bond 3.HTC floor system plate 4.Renovate your floor more clear   Quality guarante : 1.ISO9001-2000 Certificate                                                                      2.Above 10 years diamond tools exporting experience                                   3.Good service comment & product feedback from customers

Diamond PCD Grinding Tools for Werkmaster Floor Grinder

Diamond PCD Grinding Tools for Werkmaster Floor Grinder is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

3'' Dot Type Resin Diamond Concrete Polishing Pad (DMY05)

This kind of resin dot polishing pad is used on floor polishing machine ,with long lifetime and good gloss result. Velcro back with plasic bolt. Dot height: 10mm Size:3'' Dot No.: 6 Grit:50-3000#

6 Segment Grinding Disc With Post For Concrete Grinding

This kind of  6 segment metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:Post Bond:hard,soft,medium Grit:16/20#,30/40#,60/80#,120/150#

Metal Embed Concrete Floor Grinding Pads (DMY30)

1.This type of floor grinding pad is applicable for concrete floor grinding . 2.good safety and definition. 3.Velcro backed, suit for Klindex,  husqvarna, etc floor grinding machine & polishing machine Grit:30-400# Size:3''

8 Segments Metal Grinding Diamond With Pin for Concrete

 This kind of  8 segments metal bond grinding diamond is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Size:3"/83mm Segment Height:8mm Attachment system:1 Pin and 3 Screw holes Fitted to machines:some types floor grinders ,like STI, Premaster floor machines. Bond:hard,soft,medium Grit:16/20#,30/40#,60/80#,120/150#, other grits are available.