Triangular Diamond Dry Polishing Pads Sanding Pad for Multi

Triangular Diamond Dry Polishing Pads Sanding Pad for Multi Features The triangular diamond polishing pads are used for FEIN MultiMaster type oscillation tools, are also suitable for Dremel Multi-Max, Rockwell SoniCrafter, as well as Ryobi detail Application for Dry Polishing Kinds Stone: granite, marble, concrete, terrazzo, etc. Strong grinding force, good durability Excellent clarity, gloss, soft degree The corner sandpaper pads are ideal for corners and tight areas

Diteq PCD Floor Epoxy Removal Shoes

Diteq PCD Floor Epoxy Removal Shoes PCD – Split Tough and durable tool with PCD – splinters for very aggressive grinding with a coarse grinding pattern. It is the ideal tool for removing:  filling materials and adhesives very hard coatings pre grinding of very hard filling materials grinding of mastic asphalt or other bituminous surfaces Floor grinding It is a general rule for all grinding tools that a good dust extraction helps to improve the grinding result. Further information to these products you will find

Dust Extractor Replacement Bags

Dust Extractor Replacement Bags  (4 Pack) box   5.5mi   22m/72ft   5.8mil  22m/72ft   6.5mil  20m/72ft    It makes concrete dust disposal easy and convenient. It attaches to just about any dust collector or vacuum and securely holds all dust and debris.    

Ceramic Edge Diamond Grinding Cup Wheels Discs

Ceramic Edge Diamond Grinding Cup Wheels Discs Designed to be used on an a grinder at up to 11,000 rpm at 125mm and upto 7,000rpm at 180mm. Works like a metal bond grinding cup but with more control and less scratch pattern. Ideal for edge work on large floors or for controlled exposure of aggregates on concrete casting and worktops. Grit, 30,50,100, 200 and 400. The ceramic bond enables these cups to be run at grinder speed and still retain a decent lifespan. Our ceramic grinding cup wheels are designed to replace metal grinding cups. They cut far faster than metals and leave a beautifully smooth scratch pattern for such an aggressive grinding tool. Available in grit sizes: 30, 50, 100 Sizes:  5" 125mm, 7” 180mm RPM: 1000-3000 Use: Dry or wet 5/8-11'' thread or M14 threaded tool.

Quick Change Trapezoid Pads with PCD segments and dot seg

Quick Change Trapezoid Pads with PCD segments and dot seg PCDs with a metal button are less aggressive and are designed for thin coating removal.  PCD tools are direction specific. Always check the direction of rotation of the grinding heads. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate.

hand held bush hammer models

hand held bush hammer models Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 Equipment: Angle grinders Grinding Method: Wet recommended