Current Position >>> Home >>> Product Navigation >>> Products List >>> Diamond Polishing Tools >>> 58
  • Category Description
  • 3 inch, 4 inch, 5 inch, 7 inch, and larger resin diamonds pads.
  • Diamond Polishing Tools
  •  

    Double Rhombus Segment Metal Grinding Diamonds for Werkmaster

    cliks:911
    Inquiry number:0

    Double Rhombus Segment Metal Grinding Diamonds for Werkmaster

    Specification: Werkmaster Metal Grinding Diamonds with Two Pins 1.Grit:16#-400# 2.Soft,Medium,Hard Bond 3.Werkmaster floor system plate 4.Renovate your floor more clear

    Trapezoid PCD Conrete floor tools

    cliks:910
    Inquiry number:0

    Trapezoid PCD Conrete floor tools

    Trapezoid PCD Conrete remove tools For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.  

    5inch Turbo Cup Wheel with 7/8'' arbor

    cliks:910
    Inquiry number:0

    5inch Turbo Cup Wheel with 7/8'' arbor

    5inch Turbo Cup Wheel with 7/8'' arbor Cup Wheel designed for fast rough dry or water-cooling grinding  and shaping of marble and granite surfaces, cormers.edges and and angles,comes in aluminum base providing light weght and fast cooling effect by high comductivty. Features:     1). 180mmx22.23mm hole  2).Coarse Medium Fine grit 3).Turbo segment for high grinding efficiency and using easily 4).It attaches to hand held grinders and floor polishing machine      

    Trapezoid Metal Bond Grinding Shoes on Diamatic Grinder

    cliks:907
    Inquiry number:0

    Trapezoid Metal Bond Grinding Shoes on Diamatic Grinder

    Trapezoid Metal Bond Grinding Shoes on Diamatic Grinder Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit We can also make it for concrete floor. Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.   Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.     Trapezoid Metal Bond Grinding Shoes on Diamatic Grinder These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish    

    250mm Diamond Concrete Grinding Segment Head

    cliks:898
    Inquiry number:0

    250mm Diamond Concrete Grinding Segment Head

    250mm Diamond Concrete Grinding Segment Head   10" Grinding head discs are designed to remove hard epoxies some coatings as well as grinding down rough cured concrete floors, feathering uneven joints or grinding down trip hazards.  Each plate has a universal bolt hole pattern, and will work on the majority of all grinding machines.     The 10 segment  disc provides quick removal rates with a rougher finish. The 20 segment disc provides a smoother finish. Use the Green Concrete bond for longer life in new concrete, rainouts or when grinding abrasive concrete.   Materials: Available in Cured Concrete & Green Concrete Specs Equipment: Floor Grinders that take 10" plates  

    5 Segments Diamond Grinding Block for Concrete

    cliks:896
    Inquiry number:1

    5 Segments Diamond Grinding Block for Concrete

    5 Segments Diamond Grinding Block for Concrete Featuring the same QuickChange style attachment that easily slides in and out of reusable plates, with no bolting required. New QuickChange Tooling with Rectangular Segments for Soft, Medium, Hard and Extra Hard Concrete are recommended for aggressive grinding and light coating removal. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.

     

  • 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166