hand held bush hammer models

hand held bush hammer models Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 Equipment: Angle grinders Grinding Method: Wet recommended

6 Inch Lichi Bush Hammer Plate for Hand Machine

6 Inch Lichi Bush Hammer Plate for Hand Machine Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 or M14 Equipment: Angle grinders Grinding Method: Wet recommended

MAGNETIC TRAPEZOID Quick Change Diamond Shoes

MAGNETIC TRAPEZOID Quick Change Diamond Shoes Fast Change – alternative tooling for Edco, the fast change system is quick and easy to use without the use of unnecessary hardware or expensive magnets. Using the Fast Change will help with reduce downtime, save money and increase production. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate. Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft

9Inch Wool Polishing Pads for Lavina

9" V-HARR 9Inch Wool Polishing Pads for Lavina Grit：50-100-200-400-800-1500-3000# V-Harr Discs For Polishing Concrete, Marble & Terrazzo V-Harr discs are felt-backed pads for polishing and restoring concrete, marble, and terrazzo floors. They are used on planetary floor polishers equipped with Velcro backed holding plates. The high quality felt between the resin segments works to clean the floor as well as polish the concrete to a mirror finish. Dry use is strongly recommended. However, V-Harr will produce remarkable gloss results on black granite when used wet. These discs are used for the final polishing process.

Dust Extractor Replacement Bags

Dust Extractor Replacement Bags  (4 Pack) box   5.5mi   22m/72ft   5.8mil  22m/72ft   6.5mil  20m/72ft    It makes concrete dust disposal easy and convenient. It attaches to just about any dust collector or vacuum and securely holds all dust and debris.    

BW Diamond Semgent Floor Grinding Block

BW Diamond Semgent Floor Grinding Block Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first