Lavina diamond carbide scrapers for concrete floor

Lavina diamond carbide scrapers for concrete floor Direction: right or left Fitted in:Lavina grinder Size: 19*19*7mm Application:Terrazzo, Concrete,Granite,and Marble,etc Advantage: 1) High gloss finishes in very short time 2) Never mark the stone and burns the surface of the stone 3) Bright clear light and never fade 4) Different granularities and sizes as requested 5) Competitive price and superior quality 6) Beautiful package and fast delivery 7) Excellent service Time is money, and choosing the correct diamond tool for a job can save you a lot of time. Start by choosing a professional supplier. Then you can always get qualified help if something does not work as you expect. Remember, price and quality tend to go together. A low-cost tool of mediocre quality is rarely a good investment  

PCD for Lavina x grinder

PCD for Lavina x grinder For removing coating/painting Application: Lavina x plate  

Single segments Lavina disc for concrete

Products introduction Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.   Products describtion Single segments Lavina disc for concrete Grit: 30-400# Bond: Soft-medium-hard Segs No: 1 Fitted in: Lavina Grinder machine Application: concrete floor grinding

New design segments HTC grinding disc for concrete floor

New design segments HTC grinding disc for concrete floor Diamond grinding disc for soft and hard floor, available with several grit sizes The grinding discs listed on this page are designed to be used with planetary grinders in combination with Diamad adapter plates. diamond grinding wings are designed to be fitted on  3-headed planetary grinder, as well as on similar (concrete) grinders from other suppliers. Diamad discs are available in three bond, soft-medium-hard.This three bond system is specially designed to make life easier for customers. Detail: Grit:6,16,30,60,80,120,150# Bond: Soft-medium-hard Fitted in: HTC grinding machine Application:good at grinding concrete,different hardness have different bond 4.Bond:soft bond;medium bond;hard bond or do according requires from customers. for grinding concrete, hard granite, marble, engineered stone, etc Advantages: 1)Durable metal/resin compound 2)Effective in the process of grinding and polishing concrete floor 3)Different granularities and sizes as requested 4)Competitive price and superior quality 5)Beautiful package and fast delivery 6)Excellent service

5 PCD Diamond Traps for Epoxy Removing

5 PCD Diamond Traps for Epoxy Removing For removing epoxy coating ,glue Applicaiton: Floor Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Corner pad work on milkauwake oscillating tool

Corner pad work on milkauwake oscillating tool Triangular Diamond Corner Pads can be used for wet grinding or dry grinding, are made from the premium grade diamond and use an ultra-high quality iron backing. These triangle pads allow you to grind installed floor corners where a round pad cannot access. designed for fast and effective thin resin and paint removal on hard or good substrate cement floors.