6 inch 16 segments diamond metal grinding pads

Products introduction Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.   Products describtion 6 inch 16 segments diamond metal grinding pads Grit: 30-400# Bond: Soft-medium-hard Segs No: 16 Fitted in: Grinder machine Application: concrete floor grinding

test

test

Diamond Wet Polishing Pad

 Diamond Wet Polishing Pads Size available in 4inch Grits come in 50-100-200-400-800-1500-3000# Application: stone polishing

4 Inch 100mm Diamond Wet Polishing Pads

Product name: 4 Inch 100mm Diamond Wet Polishing Pads    For polishing fuscous and light granite. Not stain on the stone surface.  Grit: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, Buff  Diameter: 4"  Features:  A) High gloss finishes in very short time  B) Never mark the stone and never burns the surface of the stone to change the natural color  C) Bright clear light and never fade  D) Suitable for the grinding process of the curved or polygon surface  Operation speed: 600-1200rpm   Delivery Time：7-12 days For more details, pls contact us, we warmly welcome you to negotiate and cooperate with us.

4inch new type Klindex resin polishing puck

4inch new type Klindex resin polishing puck Size available in 4inch Grits come in 50-100-200-400-800-1500-3000# Application:Klindex Floor polisher

Double PCD Double Bar Diamond Segment for Terrco

Double PCD Double Bar Diamond Segment for Terrco For removing epoxy coating ,glue Applicaiton: Floor Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.