Diteq PCD Floor Epoxy Removal Shoes

Diteq PCD Floor Epoxy Removal Shoes PCD – Split Tough and durable tool with PCD – splinters for very aggressive grinding with a coarse grinding pattern. It is the ideal tool for removing:  filling materials and adhesives very hard coatings pre grinding of very hard filling materials grinding of mastic asphalt or other bituminous surfaces Floor grinding It is a general rule for all grinding tools that a good dust extraction helps to improve the grinding result. Further information to these products you will find

Diamond grinding shoes for Diteq concrete floor grinder

Diamond grinding shoes for Diteq concrete floor grinder 2 diamond segments size 40 x 12x 12 mm. Choose between one or two segments (buttons or bars) to control the speed and aggressiveness of the cut. Double button / bar tools are designed for heavier machines, and are not recommended for grinding machines smaller than 25 inches. Single button / bar tools are designed for lighter machines, or where aggressive stock removal is required. We recommend using single-segment diamond tools for the first step even with heavier machines for faster opening of the concrete. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate. Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft  

Diteq Diamond Grinding Shoes For Concrete Floor

Diteq Diamond Grinding Shoes For Concrete Floor 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut   All are designed to grind and smooth bumps and rough surfaces and is built with a full 15mm segment height (One of the biggest segments in the industry), giving this tool supreme life expectancy. Green Giant Metals are very aggressive segments that easily attaches to the segment plate. These tools provide fast cutting speeds due to the highest MBS 960 XL grade synthetic diamonds. Works on all concrete grinding machines, bolt on, and magnetic plates Metal backed tooling - works great on our magnetic plates Long life expectancy and very aggressive Meets the highest expectations of smooth scratch patterns Life Expectancy: 10,000 - 12,000 Sq Ft  

Double Bauta Seg Diteq Floor Grinding Pads

Double Bauta Seg Diteq Floor Grinding Pads Best for Prepping Polishing Projects Leaves Less Scratches. Hexagonal segments are generally used earlier in the grinding stages for heavier, more aggressive grinding. Round segments are chosen for their finer grit size and shape to reduce scratching during the finer grinding stages. Available in grit sizes 20, 30, 50 and 100. Largest industry segments at 0.5" (13mm) high. Strong base plate with milled Redi Lock tab for attachment to carrier discs.  

Arrow Segment Grinding Shoe for Diteq Floor Grinder

Arrow Segment Grinding Shoe for Diteq Floor Grinder Designed with different bond hardness and grit size to suit all kinds of concrete, terrazzo, granite and marble, and for removing paint, adhesive and all kinds of coatings. Aggressive plow shaped arrow segment design works well to lift coatings as it grinds Features Double arrow segments Ideal for epoxy and glue removal Comes in a pack of three (priced individually) Available in soft, medium, and hard bonds

Bush Hammer for Handheld Grinders

Bush Hammer for Handheld Grinders The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 OR M14 Equipment: Angle grinders Grinding Method: Wet recommended