4 Segmentd Terrco Metal Diamond Grinding Disc
Size:3"/80mm diameter. Segmnts No.:4pcs Grit:16#-400# Thickness of Disc: 10mm Segment Height:8mm We offer three bonds soft, medium, and hard, and also can make as the bonds you need, like very hard, very soft bond. Fitted to Terrco floor machine. How to use: Put it on the plug holder to connect to Terrco machine.
New Type 45 Grains Bush Hammer Roller with Support
Outside diameter: 45mm Inside diameter:12mm Grains No.:45 grains Fitted to put on different sizes of bush hammer plates. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing.
2inch Terrco Machine Used Metal Plug Holder
Size: 2 inch Used to Terrco metal diamonds to connect to Terrco floor machine; or connect a metal velcro backing pad to put 3inch resin floor polishing pads.
8Segments Metal Bond Grinding Diamond with 1 Pin
8Segments Metal Bond Grinding Diamond with 1 Pin Size:3"/80mm diameter, with 1Pin. Segmnts No.:4, 6, 8,10 Grit:16#-400# Thickness of Disc: 10mm We offer three bonds soft, medium, and hard. Fitted to STI/Premaster floor machine.
Klindex Metal Grinding Diamond With 3 Holes
Metal Bond Diamond with 3 holes are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. There are 7 pieces segments on the metal body. Size:4"/100mm diameter, with 3 holes. Grit:16#-400# We offer three bonds soft, medium, and hard. Fitted to Klindex floor machine.
5 Dots Velcro Metal and Resin Hybrid Polishing Pad
This new type of concrete metal pad is metal and resin hybrid and is used for first grinding concrete before using resin pads, suitable for general floor grinding machine. Size:3''/80mm Grit:30#-150# Velcro back. Segment No.: 5 Dots