Lavina Bush Hammer With Quick-Change Slide-On Base

Lavina Bush Hammer With Quick-Change Slide-On Base Create a bush hammered profile, ideal for exterior applications. Can be used with any electric LAVINA grinder as well as other grinders that use a QuickChange adapter plate (bush hammers are not recommended for use with high rpm machines such as L30G); Each roller is attached to our standard QuickChange trapezoid pad, that slides easily in and out the tool holder plate with no bolting required; However, you should always attach the security plates for safe operation with LAVINA grinders. Comes in boxes of 3 pieces, rollers mounted on quickchange trapezoid plates.  

BUSH HAMMER PLATE D 240mm For klindex

BUSH HAMMER PLATE D 240mm For klindex Special tool suitable for many applications: safety anti-slip surfaces on marble, granite and natural stones. Floor preparation, glue, varnish and resin coating removal To break-down thick coating difficult to remove with normal diamond tools Bush Hammer allow to get “face-see effect” “on precast panels” Scarification of any kind of surface Orange-peel skin effect on concrete and any surface BUSH HAMMER EFFECT It makes anti-slip marble, granite and natural stones surfaces. It removes glues, paints and epoxy resin. It shatters thick resins hardly removable with other type of tools. It creates the “exposed face effect” on precast panels. It bush hammers all type of surfaces. Prepares the surface for resin application. Bush hammer used in combination with diamond tools, leale the surface perfectly smoothened and to to the desired conditions of roughness according to the next required treatment. GRIT AVAILABLE STANDARD SIZE AVAILABLE Diameter 100mm Diameter 140mm Diameter 200mm Q.A. Diameter 240mm Q.A.

HTC 270MM 3 ROLLERS BUSH HAMMER PLATE FOR CONCRETE

HTC 270MM 3 ROLLERS BUSH HAMMER PLATE FOR CONCRETE BUSH HAMMER EFFECT It makes anti-slip marble, granite and natural stones surfaces. It removes glues, paints and epoxy resin. It shatters thick resins hardly removable with other type of tools. It creates the “exposed face effect” on precast panels. It bush hammers all type of surfaces. Prepares the surface for resin application. Bush hammer used in combination with diamond tools, leale the surface perfectly smoothened and to to the desired conditions of roughness according to the next required treatment.  

Bush Hammer Roller for HTC Grinders

Bush Hammer Roller for HTC Grinders ultra aggressive prep tool for the HTC. The  Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. They are also great for coating removal. ***This product is roller only. Plate, mounts and complete kits sold separately.  FEATURES For stone surface fabricating,making bush hammered effect for stone products To remove old glue and resin coatings, in particular thick resins Use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface For floor preparation before laying new coatings To expose the aggregate in concrete floors to prepare for concrete polishing Creates slip-resistant finish on granite and marble, breaks down coatings standard diamonds can't touch, prepares surface for application of thin-set overlay The repeated hit of these carbide tips into stone or concrete surface creates a rough, pockmarked texture that looks like naturally weathered rock Use under 700 rpm Bush Hammer Plate, 9 needed

3‘’ Bush Hammer Rollers For ASL

3‘’ Bush Hammer Rollers For ASL 45 tipped, ultra aggressive prep tools for use on walk-behind grinders. Bush hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. Adapter plates available for different fits of grinders, including: Bolt-on grinders including Sase, Diamatic, CPS, Klindex, Bartell Fast change grinders including Syntec converted plates Equipment: Walk-behind floor grinders Grinding Method: Wet recommended

240mm Diamatic Texture Safe Bush Hammer Tooling

240mm Diamatic Texture Safe Bush Hammer Tooling  A bush hammer is a tungsten tool used to remove coatings or texture concrete. The 45 pins leave an excellent profile for the bonding of coatings and overlays. This tool is also effective at creating a non-slick profile suitable for both inside and outside environments. A Bush Hammer profile is also used as a design element Complete Bush Hammer 240mm Plate Mounts to Diamatic 780