2 Quarter Round PCD Traps with Single Sacrificial Bar For Removing Epoxy Coating

The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

New Type Edge Polishing Pads for Stone

Wet edge polishing pads Characteristic: used for  processing  granite,marble, tomb etc. Delivery Time：7-12 days Grit 50# 150# 300# 500# 1000# 2000# 3000# 0#   Diameter 4" 5" 7" 100mm, 125mm,150mm

Ceramic Trasitional Polishing Pads for Diamaic Grinder

The Ultimate Transition from Metals to Resins   Application: Diamatic Grinder Grit:30-400#   Dry  use  

Double Rhombus Segment Metal Grinding Diamonds for Werkmaster

Specification: Werkmaster Metal Grinding Diamonds with Two Pins 1.Grit:16#-400# 2.Soft,Medium,Hard Bond 3.Werkmaster floor system plate 4.Renovate your floor more clear

X Series Two Button Quick Change Trap For Concrete

X-Series Two Button Quick Change Trap For Supper Hard/Medium/Soft Concrete Featuring the same QuickChange style attachment that easily slides in and out of reusable plates, with no bolting required. ** Please note X-Series Tooling can be used on X-Series and older model machines, but older model tooling cannot be used on X-Series machines.  New QuickChange Tooling with Rectangular Segments for Soft, Medium, Hard and Extra Hard Concrete are recommended for aggressive grinding and light coating removal. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.

Double Rhombus Segments Diamond Grinding Shoe Concrete Polishing Disc

They are with high quality diamond segments suitable for floor grinding machines, perfect for coating. Specification: 1.Grit:16#-400# 2.Soft,Medium,Hard Bond 3.Fit on floor system plate 4.Renovate your floor more clear