10.8 inch Bush Hammered Plate for HTC Grinders

10.8 inch Bush Hammered Plate for HTC Grinders BUSH-HAMMER is a special tool that can be easily attached to our machines to bush-hammer the floor. APPLICATIONS: 1. To create anti-slip surfaces. 2. To remove old glue and resin coatings, in particular thick resins. 3. To use as a scarifying machine with the advantage that it is aggressive but gentle enough not to “dig” uncontrollably into the floor surface. 4. For floor preparation before laying new coatings. 5. To expose the aggregate in concrete floors to prepare for concrete polishing. Bush Hammered Plate with 3 Rollers Diameter:10.8"/270mm Bush Hammered Rollers:3 Rollers     Grains NO.: 45 pieces Application: grinding and polishing concrete, terrazzo and other stone. Fitted to HTC 800 grinders and others' floor grinders. Sizes and connection types can be made according to clients' requirement.  

Impregnated Diamond Drill Bits DCB_35

These Dry Diamond Drill Bits work on Granite, Marble, Travertine, Limestone, Concrete without water cooling. Thread size is M14 or 5/8-11 Thread or any others. Diamond Core Drill Bits are used for core drilling concrete, green concrete, brick, hard brick, clay pavers, pavers, asphalt and field stones. Diamond Core Drilling Bits come laser welded, braze welded and vacum welded. Diamond Core Drill Bits are designed with premium grade diamonds for superior cutting performance and longevity. Core drilling bits are engineered with special barrel vents to allow easy removal of cutting debris.   

Vacuum Brazed Diamond Drum Wheel

Zero Tolerance Diamond Drum Wheel/Sink Hole Granite Stone Concrete is designed for stock removal on granite and hard stone grinding away excess stone to prepare for polishing. Drum Wheel is used for polishing stone side after finishing Zero Tolerance Wheel. Vacuum brazed type is suitable for marble,glass and other engineered stones.

152mm Grinding wheel for granite sinks

Diameter:152mm Center Hole: 27mm Segments NO.:33 pieces Segment Height:5mm Grit:601# For grinding granite sinks. Fit to CNC machines

450mm Granite Cutting Blades

Granite Cutting Blades 1. Sharp & smooth cutting 2. Granite cutting(normal type) 3.18''/450mm 4. 50/60mm arbor 5.Segment size:40x3.8x12mm

Marble Cutting Blades 450mm Saw Blades

Marble Cutting Blades 450mm Saw Blades 1. Sharp & smooth cutting 2. Marble cutting(normal type) 3.18''/450mm 4. 50/60mm arbor 5.Segment size:40x3.8x10mm