Single Triangle segment HTC grinding block

Triangle segment HTC grinding block HTC grinding diamond segments are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments .    We offer three bonds soft, medium, and hard.   Grinding plate fitted on HTC grinder machines.   Grit:16#, 30/40#, 60/80#, 120/150#  

3 Inch Diamond Typhoon Type Resin Floor Polishing Pads for Terrazzo

3 Inch Diamond Typhoon Type Resin Floor Polishing Pads for Terrazzo 1. Extra thick segments designed for long product life. 2. 10 mm thick diamond discs are the thickest on the market. 3. Female velcro back - attaches to any male velcro face. 4. Typhoon diamond resin discs are manufactured with high segments for long life and also have a uniquely designed waterway channel for swarf removal. 5. Excellent for surface polishing and floor restoration of marble, terrazzo, travertine.   Typhoon Diamond Discs are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. The Typhoon Discs may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface. 1. Typhoon Diamonds use the latest technology - Our most popular diamond disc. 2. Average life of the Typhoon diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile). 3. Wider range of operating RPM's from 150 to 3500. 4. Higher quality diamonds with multiple edges are used. 5. Up to 3 times more diamonds per pad than competitors discs. 6. The longest lasting resin bond diamonds you can buy. Diamond discs are available in the following grits: 50#-100#-200#-400#-800#-1500#-3000#

Terrco Diamond Grinding Polishing Plug for flooring

Terrco Diamond Grinding Polishing Plug for flooring This arrow shape segment metal grinding disc is used for aggressive removal applications. The wide gaps between segments offer more of a cutting edge and will not load or gum up as much. The arrow shape is perfect for all coatings such as epoxy, urethane paint, mastic and other similar coatings. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.

Waterproof Apron for The Stone Countertop Fabrication Working

Waterproof Apron for The Stone Countertop Fabrication Working Reinforced Hycar for Rugged Wear. These aprons have are stitched for extra strength and have a lightweight PVC coating that gives you a waterproof, highly resistant, protective layer while still being light enough to wear all day. These aprons are the perfect balance of being light in weight and heavy duty on performance so you don't feel like you're wearing a lead weight but you still have a high degree of protection.

7 Inch Pneumatic Grinder for Polishing (AG04)

Type: Stone Profile Grinder, Wet/Dry Angle Grinder Average Air Consumption: 6 Cfm Maximum Torque: 3"/4" No-Load Speed: 4,500 rpm Air inlet: 1/4'' Air house: 3/8'' Working Pressure: 90psi Weight: 1.37kg Thread: M14 or 5/8-11 Certificate: ISO9001, SGS Delivery time: 7-12 days

2 Quarter Round PCD Traps with Single Sacrificial Bar For Removing Epoxy Coating

The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.