Waterproof Apron for The Stone Countertop Fabrication Working

Waterproof Apron for The Stone Countertop Fabrication Working Reinforced Hycar for Rugged Wear. These aprons have are stitched for extra strength and have a lightweight PVC coating that gives you a waterproof, highly resistant, protective layer while still being light enough to wear all day. These aprons are the perfect balance of being light in weight and heavy duty on performance so you don't feel like you're wearing a lead weight but you still have a high degree of protection.

7 Inch Pneumatic Grinder for Polishing (AG04)

Type: Stone Profile Grinder, Wet/Dry Angle Grinder Average Air Consumption: 6 Cfm Maximum Torque: 3"/4" No-Load Speed: 4,500 rpm Air inlet: 1/4'' Air house: 3/8'' Working Pressure: 90psi Weight: 1.37kg Thread: M14 or 5/8-11 Certificate: ISO9001, SGS Delivery time: 7-12 days

2 Quarter Round PCD Traps with Single Sacrificial Bar For Removing Epoxy Coating

The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

New Type Edge Polishing Pads for Stone

Wet edge polishing pads Characteristic: used for  processing  granite,marble, tomb etc. Delivery Time：7-12 days Grit 50# 150# 300# 500# 1000# 2000# 3000# 0#   Diameter 4" 5" 7" 100mm, 125mm,150mm

Ceramic Trasitional Polishing Pads for Diamaic Grinder

The Ultimate Transition from Metals to Resins   Application: Diamatic Grinder Grit:30-400#   Dry  use  

Double Rhombus Segment Metal Grinding Diamonds for Werkmaster

Specification: Werkmaster Metal Grinding Diamonds with Two Pins 1.Grit:16#-400# 2.Soft,Medium,Hard Bond 3.Werkmaster floor system plate 4.Renovate your floor more clear