Resin Filled Cup Wheels

Resin Filled Cup Wheels  Resin between segments and proper balancing eliminates vibration and chipping when shaping • Designed to be used dry or wet, with new water channels • Provides a safer alternative to silicone carbide wheels • Available in coarse, medium, and fine grits • Beveled edge helps grind over curved edges with ease

2‘’ Resin Velcro Holder for PHX21 Grinder

2‘’ Resin Velcro Holder for PHX21 Grinder 2″ (50mm) velcro slid-on plates to easily change over from diamonds to pucks or ceramics. www.stonediamondtool.com/productsView-PHX_diamond_grinding_disc_for_concrete_floor-1774.html https://www.stonediamondtool.com/productsView-Double_Round_Segment_Diamond_Grinding_Disc_for_PHX_Concrete_Floor_Grinder-1298.html    

Diamond Grinding Plate M8 Connection

Diamond Grinding Plate M8 Connection 3-hole bracket with M8-connection. 2 diamond segments size 40 x 12 x 12 mm. All  diamond grinders use the same style of bolt-on diamond products. The quantity used on each machine will vary depending upon the diameter of the drive plate; on the larger machines, the number of segments can be varied so as to alter the pressure being applied on each segment, thereby changing the operating characteristics. The abrasive medium in the grinding segment is industrial diamond. This comes in different grades, generally referred to as grit (sizes). The body of the segment, in which the diamond grit is encased, is a metal alloy, generally referred to as the bond. The composition of the bond (the metal alloy) dictates the rate at which it wears away, hence the rate at which the diamond grit is exposed. A hard concrete surface will require a diamond with a softer bond; the softer bond allows the grit to become exposed more quickly, with the effect that the hard surface can be ‘worked’ most efficiently. Conversely, a softer or more abrasive concrete surface will benefit from a harder bond as this will protect the diamond from being exposed too quickly.  

16 Grit Diamond Floor Prep Tool

16 Grit Diamond Floor Prep Tool 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. Use the rectangular bar / segment tools when a more aggressive cut is neededAvailable in soft bond, medium bond and hard bond. For wet or dry use. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate.  Fitted to ASL/XINGYI Grinder

4 Seg Edco Block Grinding replacement part

4 Seg Edco Block Grinding replacement part Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft

3inch Terrco 4 Big Bar Segment Grinding Tools

3inch Terrco 4 Big Bar Segment Grinding Tools Beveled edges reduce operator and machine stress on lippage and rough floors Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate. Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft