XRC High Performance Resin Polishing Rings (DMY27)

This kind of polishing rings are designed to polish edges on concrete floors after they have been grinded and honed with the 3N Copper Rings. This special bond will produce a high gloss shine on concrete. For dry applications only! Size:7'' Grit:50-3000#  

6 segs metal diamond floor grinding pads DMY38

This kind of  6 segment metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:Velcro back or 3 thread holes, or with 1 pin/post Bond:hard,soft,medium Grit:16#-400#

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Magnetic Diamond Grinding Segments

These kind of  grinding shoes are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate can be magnetic or three holes, fit on HTC ,CPS, Diamatic, Klindex etc   Grit:16#, 30/40#, 60/80#, 120/150#  

Arrow floor grinding diamond discs

This kind of  5 arrow segments metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:velcro backed or 3 thread Bond:hard,soft,medium Grit:16#-400#

Con Shine Diamond Floor Polishing Pads (DMY22)

This type of floor polishing pads are used for marble floor  polishing. left a high gloss shine.  Straight type Diameter: 3'',4'' Grit: 50-3000# Velcro Backed Use Dry or Wet