BW Diamond Semgent Floor Grinding Block
BW Diamond Semgent Floor Grinding Block Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first
Quick Change Double Segment Metal Grinding Pads
Quick Change Double Segment Metal Grinding Pads Grits:6# 、 16#、25#、30#-120# Bonds:hard、medium、soft each segment is covered with little dots which attack the floor first, thus letting the diamond open much faster for optimized grinding efficiency Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate.
4inch Lingt triangle dry polishing pad
4inch Lingt triangle dry polishing pad Resin Dry Polishing Pads 4" are specially designed to work on dry, natural stone surfaces, especially granite and marble and cured concrete. The 50 and 100 grit polishing pads are for initial work when a larger grit size is necessary. The 200, 400, and 800 grit polishing pads are for medium buffing. The 1500 and 3000 grit polishing pads are the finest and recommended for final polishing work. The Buff pad needed for final finishing in polishing work on natural stone and cured concrete.
3inch Metal Bond Floor Plates Grits:6# 、 16#、25#、30#-120# Bonds:hard、medium、soft metal bond floor grinding tools are engineered using the latest technology and finest grade diamonds to give the best performance and value. The wide range of grit sizes can handle the toughest grinding and leveling or be the foundation stages for subsequent polishing steps. Choose from a hard, medium or soft bond depending on the type of concrete or stone. Designed for long life with minimal scratch patterns, these tools are built for professionals.
hand held bush hammer models Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 Equipment: Angle grinders Grinding Method: Wet recommended
100mm JS Metal Bond Concerte Floor Grinding Pads
100mm JS Metal Bond Concerte Floor Grinding Pads Be designed for fast and effective thin resin and paint removal on hard or good substrate cement floors. It does not damage the floor. Not for use on green concrete or abrasive concrete floors. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate. Grits:6# 、 16#、25#、30#-120# Bonds:hard、medium、soft