Double PCD Double Bar Diamond Segment for Terrco

Double PCD Double Bar Diamond Segment for Terrco For removing epoxy coating ,glue Applicaiton: Floor Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Single Round Segments Diamond Grinding Disc for PHX

Triple Rounds Diamond Segments for PHX Floor Grinder   These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to Husqvarna floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#

Sintered Diamond Floor Polishing Pads for Concrete

Sintered Diamond Floor Polishing Pads for Concrete Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to floor grinder Material Concrete Usage Wet or Dry Grit 30# 50# 100# 200# 400#

Double Triangle seg Diamond tool for HTC Grinder

Grit: 16-400# Use wet or dry Suit HTC grinding machine.

Terrco 4 Bar segments Metal Bond Diamond Gringding Pads

Terrco 4 Bar segments Metal Bond Diamond Gringding Pads These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to Terrco floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#

5 Dot Segment Diamond Metal Bond Grinding Pad for Floor Grinder

5 Dot Segment Diamond Metal Bond Grinding Pad for Floor Grinder   Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.