Upgraded version Widened Epoxy Spiked Shoe

Upgraded version Widened Epoxy Spiked Shoe Epoxy (Shoe-In) Spiked Shoes are the perfect companions for job-site surface protection and fit comfortably right over your shoes. No more frustration with straps, buckles, and adjustments. Just step right into Epoxy (Shoe-In) Spiked Shoes and get to work. Immediately after putting these innovative surface prep shoes on your feet, you will notice increased stability and added flexibility when you need to bend over or kneel down. Applying epoxy floor coatings with spiked shoes has never been easier. You will love Epoxy (Shoe-In) Spiked Shoes and toss away those old plastic spikes of yesteryear. FEATURES AND BENEFITS Quick to put on and take off No need for straps or buckles Enhanced stability Enhanced comfort

Metallic Diamond Segment Edco For Concrete

Metallic Diamond Segment Edco For Concrete 6# Extremely aggressive low grit double bar used for extensive stock and rigid thick coating removal. Also an excellent tool for prepping a floor prior to applying an epoxy. 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut    

HTC diamond quick change adaptor plate

230mm HTC diamond quick change adaptor plate This easy and quick tool change system can use universal diamond tools. It has a user-friendly design to change tools. It keeps solid machine condition by no impact and the strong magnets hold the metal diamonds in place. You can use it under your machine and grind to the nearest wall.  Detail:   Diameter: 230mm   Fitted in grinder   With 3 polishing disc  Features:   1) Floor adaptor type   2) Back up pad made of metal   3) For connecting with the Diamonds   4) Use on  floor machine  Advantages   Time saving and user-friendly system.   No possibility of disconnection of the wing during heavy duty operation or transportation.   No damage to the diamond segments because there’s no need to use tools.

PCD Diamond Scraper for Xingyi

PCD Diamond Scraper Description PCD with Bar tooling has two offset 3/8” wide PCD diamonds with an angled Metal Bar. The Polycrystalline Diamonds (PCD) are very heat and fracture resistant, making them a great coating removal tool. Uses PCD with Bar tooling is designed with  bar to prevent the deeper scratching and gouging while still aggressively removing the coatings. It is generally the PCD of choice during prep for a final polished floor or stained and sealed floor. Application PCD with Bar tooling is the fastest way to remove coatings over 2 mils in thickness without harsh chemicals or messy shot blasting. Both PCD’s (Double and Single Bar) stand up well to high heat and are fracture resistant.

4 Seg Edco Block Grinding replacement part

4 Seg Edco Block Grinding replacement part Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft

Double PCD with Pad Segment compatible for Diteq

Double PCD with Pad Segment compatible for Diteq The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation. PCD Tools Ideal for coating removal and preparation for epoxy. PCD’s without metal button or sacrificial bars are very aggressive and designed for thick coating removal. They will leave a very coarse profile on the concrete floor. PCD tools WITHOUT Sacrificial bars or Metal Bond Button are the most aggressive style and will leave a very coarse profile on the concrete underneath. These are suitable for removal of: Thick mastics and glues  ¼” Thick Parking Deck Membranes 30 mils and up Epoxy Coatings Thick Elastomeric Membranes Any coating with silica sand broadcast mixed in