diamond resin polishing cleaning pad for floor

diamond resin polishing cleaning pad for floor It is perfect for grinding and polishing of cementitious toppings (overlays or screed) and concrete. Thanks to its flexible pads it is also a good problem solver in case of minor low spots when grinding and polishing concrete.  Red flakes are used to remove slight scratches and stains, forming a smooth and shiny surface Color： red Applied for: Cleaning equipment/ Floor Polisher Used for: Terrazzo floor/Marble floor/Epoxy floor/concrete floor

Quick Change Trapezoid Pads with PCD segments and dot seg

Quick Change Trapezoid Pads with PCD segments and dot seg PCDs with a metal button are less aggressive and are designed for thin coating removal.  PCD tools are direction specific. Always check the direction of rotation of the grinding heads. Our line of Precision Diamond Tooling features a great selection of metals, PCDs, and adapters that are compatible with all major grinder models. Metal bond diamonds are designed for aggressive coating removal, concrete grinding, and concrete polishing applications. Polycrystalline diamond tools, are used for concrete surface prep for fast coating, mastic and glue removal, and exposed aggregate.

9Inch Wool Polishing Pads for Lavina

9" V-HARR 9Inch Wool Polishing Pads for Lavina Grit：50-100-200-400-800-1500-3000# V-Harr Discs For Polishing Concrete, Marble & Terrazzo V-Harr discs are felt-backed pads for polishing and restoring concrete, marble, and terrazzo floors. They are used on planetary floor polishers equipped with Velcro backed holding plates. The high quality felt between the resin segments works to clean the floor as well as polish the concrete to a mirror finish. Dry use is strongly recommended. However, V-Harr will produce remarkable gloss results on black granite when used wet. These discs are used for the final polishing process.

6 Inch Lichi Bush Hammer Plate for Hand Machine

6 Inch Lichi Bush Hammer Plate for Hand Machine Compared with single layer type bush hammer plate, double layers have springs between the 2 layers which works as a buffer. This design is helpful because the stone slabs not always stay level. The Bush Hammer is an ultra aggressive prep tools for use on the hand held grinder. Bush Hammer is designed to pulverize the surface of concrete making it fast and easy to get to full aggregate exposure. It is also great for coating removal. Do not apply too much pressure on bush hammer. This can prevent roller bearing from working properly and decreasing the life span of the tungsten steel. Arbor Size: 5/8"-11 or M14 Equipment: Angle grinders Grinding Method: Wet recommended

4inch Lingt triangle dry polishing pad

4inch Lingt triangle dry polishing pad Resin Dry Polishing Pads 4" are specially designed to work on dry, natural stone surfaces, especially granite and marble and cured concrete. The 50 and 100 grit polishing pads are for initial work when a larger grit size is necessary. The 200, 400, and 800 grit polishing pads are for medium buffing. The 1500 and 3000 grit polishing pads are the finest and recommended for final polishing work. The Buff pad needed for final finishing in polishing work on natural stone and cured concrete.

180mm Ceramic Resin Ring Polishing Pads

180mm Ceramic Resin Ring Polishing Pads Ring Resin (7-inch) These flexible 7-inch Ring Resin polishing pads were specially designed for edge work and will bring out the highest luster shine. aggressively grinds through hard troweled finishes for superb results. Even inexperienced operators can grind and polish quickly without leaving gouges. Features Formulated to remove hard trowled finishes Aggressive grinding with superb results