Polycrystalline Diamond PCD

Polycrystalline Diamond PCD PCD coating PCD (Poly – Crystalline – Diamond) is, unlike single crystalline diamond, produced synthetically by sintering together many (Poly) diamond particles, usually in the size of 2 to 30 microns of a meter, with a metal binder (usually Cobalt) at high temperature and high pressure. The rate is 90-95% diamond particles and the rest is Cobalt. Polycrystalline Diamond (PCD) is diamond grit that has been fused together under high-pressure, high-temperature conditions in the presence of a catalytic metal. The extreme hardness, wear resistance, and thermal conductivity of diamond make it an ideal material for the cutting tools manufacturing.  

Metallic Diamond Segment Edco For Concrete

Metallic Diamond Segment Edco For Concrete 6# Extremely aggressive low grit double bar used for extensive stock and rigid thick coating removal. Also an excellent tool for prepping a floor prior to applying an epoxy. 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut    

ASL Piranha PCD with Triangle Segments

ASL Piranha PCD with Triangle Segments Description PCD with Bar tooling has two offset 3/8” wide PCD diamonds with an angled Metal Bar. The Polycrystalline Diamonds (PCD) are very heat and fracture resistant, making them a great coating removal tool. Uses PCD with Bar tooling is designed with  bar to prevent the deeper scratching and gouging while still aggressively removing the coatings. It is generally the PCD of choice during prep for a final polished floor or stained and sealed floor. Application PCD with Bar tooling is the fastest way to remove coatings over 2 mils in thickness without harsh chemicals or messy shot blasting. Both PCD’s (Double and Single Bar) stand up well to high heat and are fracture resistant. Grinding plate with 2 PCD-segments with one supporting segment. PCD segments for the removal of thermoplastic coatings. Paint and thin epoxy Plastic-like ceramic glues Porous cer glues  

4 Seg Edco Block Grinding replacement part

4 Seg Edco Block Grinding replacement part Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft

Quick Change Plate for Popular Grinders

Quick Change Plate  for Popular Grinders Replace your current grinding machine base plate  to enable use of  “Redi-Lock” style grinding shoes.   https://www.stonediamondtool.com/productsView-New_Types_Husqvarna_diamond_grinding_disc-1748.html https://www.stonediamondtool.com/productsView-Redi_lock_Husqvarna_diamond_segment_tools_grinding_disc-1722.html https://www.stonediamondtool.com/productsView-Buff_Grit_Resin_Concrete_Polishing_Puck-1721.html  

Cement polishing pads for power trowel

Cement polishing pads for power trowel Machine: Ride-on and behind power trowel and swing machine=Compatibility All the power trowel on the market Advantages / Benefits Exceptional grinding and polishing speed for large to very large surfaces working on every type of concrete. Highly flexible system to create maximum floor contact Heavy duty system with maximum lifetime and minimum cost per m² Excellent tooling life giving the lowest cost per m² for a cream polishing system on the market.Power-trowel polishing made faster Size:3inch/80mm Grit:30-50-100-200-400-800-1500-3000# Thickness:12mm Usage:wet Connection:Patended clip Speed:500-1000rpm Package:6pcs/box