5'' Velcro Back Concrete Cleaning Pads (DMY12)

This type of resin polishing pads are used on floor polishing machine ,for concrete, marble, terrazzo and other floor surface polishing. Type: Velcro back Size: 5'' Grit: 50-3000#

Fan Style HTC Grinding Diamond Segments

HTC grinding shoes are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in three fans style ,also can do double bar and single bar segment , rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate fit on HTC floor grinder machine   Grit:16#, 30/40#, 60/80#, 120/150# or other grits you need.  

5'' Concrete Wet Polishing Pads (DMY14)

This kind of concrete polishing pads are used on concrete floor polishing ,excellent for planetary face polishers. Wet use only. Thickness:5mm Special concrete bond. Grit:50-3000# Size:5'',7''

Terrco Rough Grinding Metal Pad

The patented Beveled Edge Disc grinding system is an innovative solution for your grinding needs. The beveled edge is optimal for climbing over joint edges and aggregate without sprawling the edges of the material or the disc. The BED system works great for grinding terrazzo. Advantages to the BED system are: less stone pull and much less tool and machine vibration. Diameter:3"/80mm Grit:16-150# Bond:soft,medium,hard

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing

Piranha Husqvarna PCD Diamond Tools for Epoxy Removing For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Double PCD EG Grinding Plate

1.This kind of grinding aggressive removal tool for removal of coatings, mastics or rough concrete. 2.Use EG Adapter , have quick change attached in the back  3.Left hand and right hand 4.Suit Prep/Master 5.Can do according your requirement.