3 Inch Hybrid Resin Floor Polishing Pads for Concrete

3 Inch Hybrid Resin Floor Polishing Pads for Concrete 1. Extra thick segments designed for long product life. 2. 10 mm thick diamond discs are the thickest on the market. 3. Female velcro back - attaches to any male velcro face. 4. Excellent for surface polishing and floor restoration of marble, terrazzo, travertine.       3 Inch Diamond Velcro Concrete Floor Polishing Pads are a high quality long lasting resin bond diamond polishing disc used to restore and polish a variety of stone floor surfaces. It may be used under a variety of floor machines, including single disc floor machines, hand held polishers as well as multiple head machines like the Cimex. The Typhoon diamond pads perform well on a variety of hard surfaces including Marble, Terrazzo, Limestone, Travertine, leaving a flat, highly polished surface.     1. Average life of the diamond discs ranges from 3,000-5,000 sq ft. depending on floor condition, density (hardness of the stone) and lippage (unevenness of the tile). 2. Wider range of operating RPM's from 150 to 3500. 3. Higher quality diamonds with multiple edges are used. 4. Up to 3 times more diamonds per pad than competitors discs. 5. The longest lasting resin bond diamonds you can buy. Diamond discs are available in the following grits: 50#-100#-200#-400#-800#-1500#-3000#

Double Bar Diamond Traps

Double Bar Diamond Traps Grit available:6# 16# 25# 30# 40# 70# 120# # 200# Bond available: Hard bond for soft concrete Medium bond for medium concrete Soft bond for hard concrete Extra soft bond for extra hard concrete Extra hard bond for extra soft concrete

2 Quarter Round PCD Traps with Single Sacrificial Bar For Removing Epoxy Coating

The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Sponge Polishing Pads for Concrete Floor

Sponge Polishing Pads for Concrete Floor   Size availabe in : 7'' 11'' 12'' 17'' Grit available in:50-100-200-400-800-1500-3000# Application:  grinder/polisher

5inch Diamond Double Row Segment Cup Grinding Wheel

5inch Diamond Double Row Segment Cup Grinding Wheel Type:Double row Grit:Coarse/Medium/Fine Bond:Hard/Medium/Soft Connection:5/8-11''  thread or M14 thread or 22.23mm arbor  

Quick Change Diamonds for Concrete Floor

Single /Double seg Metal Bond Grinding Diamond Grit:16#-400#   Thickness of Disc: 10mm We offer three bonds soft, medium, and hard.