5 Segments Diamond Grinding Block for Concrete

5 Segments Diamond Grinding Block for Concrete Featuring the same QuickChange style attachment that easily slides in and out of reusable plates, with no bolting required. New QuickChange Tooling with Rectangular Segments for Soft, Medium, Hard and Extra Hard Concrete are recommended for aggressive grinding and light coating removal. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.

Single Triangle segment HTC grinding block

Triangle segment HTC grinding block HTC grinding diamond segments are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in double bar and single bar segment design,of course can also be rounds or arrow segments .    We offer three bonds soft, medium, and hard.   Grinding plate fitted on HTC grinder machines.   Grit:16#, 30/40#, 60/80#, 120/150#  

Husqvarna Redi liock Single Segment Metal Bond Diamond Grinding Pads

Husqvarna Redi liock Single Segment Metal Bond Diamond Grinding Pads Application:Husqvarna Grinder Grit:6# 16# 25# 30# 70# 120#  Bond: Hard/Medium/Soft     

200mm/240mm Klindex Metal Bond Grinding Plate

200mm/240mm Klindex Metal Bond Grinding Plate Grit available:6# 16# 25# 30# 40# 70# 120# # 200# Bond available: Hard bond for soft concrete Medium bond for medium concrete Soft bond for hard concrete Extra soft bond for extra hard concrete Extra hard bond for extra soft concrete       Application: Klindex griner

PCD Split Diamond Double Bar Trap for Onfloor Grinder

PCD Split Diamond Double Bar Trap for Onfloor Grinder For removing epoxy coating ,glue Applicaiton: Floor Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

10seg Metal Bond Concrete Grinding Puck with One pin

10seg Metal Bond Concrete Grinding Puck with One pin Grit available in :6# 16# 25# 30# 40# 70# 120# # 200# Bond available: Hard bond for soft concrete Medium bond for medium concrete Soft bond for hard concrete Extra soft bond for extra hard concrete Extra hard bond for extra soft concrete