Double PCD Single Bar Diamond Grinding Disc for Jiansong Grinder

Double PCD Single Bar Diamond Grinding Disc for Jiansong Grinder For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

4 Segment Diamond Grinding Plate for Concrete Floor

4 Segment Diamond Grinding Plate for Concrete Floor   Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit We can also make it for concrete floor. Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.   Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.   4 Segment Diamond Grinding Plate for Concrete Floor     These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish

Typhoon Type Diamond Resin Concrete Floor Polishing Pads

Typhoon Type Diamond Resin Concrete Floor Polishing Pads 1.Size available in 3'' and 4'' 2.Grit available in 30-50-100-200-400-800-1500-3000# 3..Aggressive grinding and polising for stone floors,especially work well on concrete floor 4..Both wet and dry polishing. But better polishing gloss and stone surface with water 5..Quantity discount is available  

Lavina disc quick change adapter for Scanmaskin

Lavina disc quick change adapter for Scanmaskin This Scanmaskin adapter easily attaches to your Scanmaskin concrete floor grinder, and allows the QuickChange system to be outfitted with Scanmaskin metal bond tooling. Installation is simple and quick—simply slide in the adapter and attach the tooling Feature: Attaches to Scanmaskin plates Allows Scanmaskin machines to accept Velco-backed polishing pads Works with all Scanmaskin concrete grinder Sold individually (most plates use 3 or 6 tools) Installs without tools Work with existing Scanmaskin Quick Change plates

100 Grit Resin Copper Bond Diamond Concrete Floor Polishing Pads

100 Grit Resin Copper Bond Diamond Concrete Floor Polishing Pads 1.Size available in 3'' and 4'' 2.Grit available in 30-50-100-200# 3..Aggressive grinding and polising for stone floors,especially work well on concrete floor 4..Both wet and dry polishing. But better polishing gloss and stone surface with water 5..Quantity discount is available   6.A great choice when transitioning from traditional metals to resins. Long life!

Single segment Metal Bond Grinding Shoes with single side lock

Single segment Metal Bond Grinding Shoes with single side lock Featuring the same QuickChange style attachment that easily slides in and out of reusable plates, with no bolting required. New QuickChange Tooling with Rectangular Segments for Soft, Medium, Hard and Extra Hard Concrete are recommended for aggressive grinding and light coating removal. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.