Single Arrow Segment Concrete Grinding Shoes for Lavina x series

Single Arrow Segment  Concrete Grinding Shoes for Lavina x series Grit available in  :6# 16# 25# 30# 40# 70# 120# # 200# Bond available: Hard bond for soft concrete Medium bond for medium concrete Soft bond for hard concrete Extra soft bond for extra hard concrete Extra hard bond for extra soft concrete

Trapezoid Metal bond PCD Pad for Diamatic Grinder

Trapezoid Metal bond PCD Pad for Diamatic Grinder For removing epoxy coating ,glue Applicaiton: Diamatic Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.  

PCD with bar Lavina concrete grinding shoes

PCD with bar Lavina concrete grinding shoes Our specially formulated grade of PCD with bar Lavina concrete grinding shoes ensure maximum wear and productivity for aggressive removal of hard-to-remove coatings, adhesives and screeds. Designed for use on Lavina machines . Other Lavina tools www.stonediamondtool.com/productsView-30_Grit_Super_Soft_Bond_Lavina_x_Metal_Grinding_Pad-1164.html www.stonediamondtool.com/productsView-Lavina_double_segments_diamond_metal_bond_grinding_pads_for_super_hard_concrete-1192.html www.stonediamondtool.com/productsView-Single_Arrow_Segment_Concrete_Grinding_Shoes_for_Lavina_x_series-1280.html      

Diamond segment Concrete Cup Grinding Wheel

  Name: Diamond segment Concrete Cup  Grinding Wheel  Diameter:4inch/4.5inch/5inch/7inch Connector: 7/8’’ Bore Description: Diamond segment Concrete Cup  Grinding Wheel is primarily used for the grinding of hard surfaces such as concrete and stone. Additional applications for this product are the fast removal of substrates, glues and adhesives. Applications: concrete, natural stone and construction products Equipment: Angle Grinder, Variable Speed Angle Grinder  

Newgrind Brazed Diamond Grinding Tools for Flooring

Newgrind Brazed Diamond Grinding Tools for Flooring These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish This universal tool will adapt to Newgrind floor grinder Material Concrete Usage Wet or Dry Grit  6# 16# 30/40# 60/80# 100/120# 150# 200# 300# 400#

5 Inch 125mm PCD Cup Wheels for Epoxy Floor Removing

For removing epoxy coating ,glue Applicaiton: Grinder   •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.