Diamond Concrete Grinding Shoes for Schwamborn grinder

Diamond Concrete Grinding Shoes for Schwamborn grinder Featuring the same QuickChange style attachment that easily slides in and out of reusable plates, with no bolting required. New QuickChange Tooling with Rectangular Segments for Soft, Medium, Hard and Extra Hard Concrete are recommended for aggressive grinding and light coating removal. Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.  

New segments 7 inch diamond grinding wheels

New segments 7 inch diamond grinding wheels Detail: Grit:6-16-30/40-60/80-100/120-200-400# Bond:soft,medium,hard Fitted in grinder Size: 7inch Arbor: 22.23mm soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability. Application: Terrazzo, Concrete,Granite,and Marble,etc 1) High gloss finishes in very short time 2) Never mark the stone and burns the surface of the stone 3) Bright clear light and never fade 4) Different granularities and sizes as requested 5) Competitive price and superior quality 6) Beautiful package and fast delivery 7) Excellent service Time is money, and choosing the correct diamond tool for a job can save you a lot of time. Start by choosing a professional supplier. Then you can always get qualified help if something does not work as you expect. Remember, price and quality tend to go together. A low-cost tool of mediocre quality is rarely a good investment  

Fan Style HTC Grinding Diamond Segments

HTC grinding shoes are designed for thin mil coating removal, mastic removal, and for the first steps in polishing.   We offer these diamonds in three fans style ,also can do double bar and single bar segment , rounds or arrow segments etc.    We offer three bonds soft, medium, and hard.   Grinding plate fit on HTC floor grinder machine   Grit:16#, 30/40#, 60/80#, 120/150# or other grits you need.  

Hybrid Type Resin Floor Polishing Pads (DMY36A)

The Pregnant Diamond Metal-Chip Polishing Pads, flexible or rigid, one of our patent pending products, a serial of high capability pads, Grit 50#--3000# Size:3'',4'' Can be used by wet or by dry. They can be applied to excellent fabrication of marble, concrete and granite. They are perfect at polishing concrete floor by dry. Everyone who has used them likes the combination of aggressive and long lasting performance. (See the Product Number Below) HAL Hardest Epoxy Dry Use Floor Pads. This is a serial of High gloss dry pads. The HAL dry pads with high diamond concentration, hardest epoxy with aluminum oxide filler are perfect for the floor of concrete and terrazzo.

5'' Concrete Wet Polishing Pads (DMY14)

This kind of concrete polishing pads are used on concrete floor polishing ,excellent for planetary face polishers. Wet use only. Thickness:5mm Special concrete bond. Grit:50-3000# Size:5'',7''

Rhombus Multi Segment Concrete Grinding Shoes

Rhombus Multi Segment Concrete Grinding Shoes This tool is made to help remove and prep for thick or thin coatings, from epoxies to glues and paints, with a very quick turn around time. It's a general metal grinding tool that works all around for faster stone exposure. It will not leave deep scratches like a PCD but will prepare the surface all while removing the coating. The life of this product is quite impressive as well.