Split Lavina PCD Diamonds for Epoxy Floor Removing

Split Lavina PCD Diamonds for Epoxy Floor Removing is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Bar Segments 240mm Klindex Metal Bond Diamond Grinding Ring with 3 Pins

 Metal Bond Diamond Grinding Ring with 3 Pins are designed for grinding concrete,granite, terrazzo and travertine etc. and for the first steps in grinding.   Size:240mm diameter, with 3 pins.   There are 12 pieces segments on the metal body.   Segment size:10mm height   Grit:16#-400#    We offer three bonds soft, medium, and hard; and also make very soft, very hard bond.   Fitted to Klindex floor machine.

6 Segments Grinding Disc With Post For Concrete Grinding

This kind of  6 segment metal bond grinding disc is designed for quick removal of thinset, glue & mastics an ideal tool substrate preparation. Use wet or dry. Attachment system:Post(15mm length or 7mm length) Bond:hard,soft,medium Grit:16/20#,30/40#,60/80#,120/150#

Double Hexagon Segments Diamond Trap for Concrete Floor Grinding

Available in: 400 grit 300 grit 200 grit 150 grit 120 grit 70 grit 50 grit 30 grit 16 grit 6 grit We can also make it for concrete floor. Available bond: soft bond for hard concrete medium bond for medium concrete hard bond for soft concrete Please check for availability.   Murat's metal-bond diamond tools are constantly being developed to meet our customers’ requirements for efficient grinding tools. Murat has developed a very broad range of metal-bond diamond tools to achieve maximum capacity at minimum cost and to suit most types of floor. Floors can be divided into different categories, such as soft floors, medium-hard floors and hard floors. Soft floors Floors of loose or porous material. A high rate of removal is achieved with these floors, but with higher tool wear. Medium-hard floors Normal building concrete. This includes marble and terrazzo floors. Hard floors Usually refers to steel trowelled floors or certain types of cement. This includes granite. The floors usually require “soft” segments.     Double Hexagon Segments Diamond Trap for Concrete Floor Grinding   These standard quality segments are a great balance between cost and performance. These segment grinding plates achieve maximum square footage at a minimal cost. Whether wet or dry, these grinding plates are effective, efficient and the product of choice. Great balance between cost and performance This grinding plate is effective, efficient and the product of choice The double rectangular segments remove adhesives, coatings and lippage Takes the floor from coarsely structured surface to pre-polish

Single Bar Double PCD Diamond Grinding Traps for Diamatic Floor Grinder

Split Lavina PCD Diamonds for Epoxy Floor Removing is an excellent choice when removing medium/heavy coatings. The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass. These PCD's are directional specific and come in clockwise and counterclockwise orientation.  •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order.  The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.  PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.

Werkmaster Metal Bond Concrete Grinding Pads

Werkmaster  Metal Bond Concrete Grinding Pads For Werkmaster machine . Grit:6# 16# 25# 30-400#  Bond: Hard/Medium/Soft