Triangel metal corner tools for special machine

Triange metal corner tools for special machine Great for corners and tight spaces. FEIN MultiMaster type oscillation tools for detailed polishing of concrete.

4 Seg Edco Block Grinding replacement part

4 Seg Edco Block Grinding replacement part Application Smoothing rough surfaces or trowel marks Grinding terrazzo Repairing surface damage to concrete slabs Removing urethane or epoxy thincoats Grinding sharp aggregates such as flint and granite Removing surface imperfections from epoxy mortars Leveling high spots (maximum 1/8") Removing thin mastics and thin-set Note: If the properly installed blocks are continually being knocked out the floor is too rough or uneven and a Concrete Planer must be use first Grits：6# 、 16#、25#、30#-120# Bonds：hard、medium、soft

PCD Diamond Scraper for Xingyi

PCD Diamond Scraper Description PCD with Bar tooling has two offset 3/8” wide PCD diamonds with an angled Metal Bar. The Polycrystalline Diamonds (PCD) are very heat and fracture resistant, making them a great coating removal tool. Uses PCD with Bar tooling is designed with  bar to prevent the deeper scratching and gouging while still aggressively removing the coatings. It is generally the PCD of choice during prep for a final polished floor or stained and sealed floor. Application PCD with Bar tooling is the fastest way to remove coatings over 2 mils in thickness without harsh chemicals or messy shot blasting. Both PCD’s (Double and Single Bar) stand up well to high heat and are fracture resistant.

ASL Piranha PCD with Triangle Segments

ASL Piranha PCD with Triangle Segments Description PCD with Bar tooling has two offset 3/8” wide PCD diamonds with an angled Metal Bar. The Polycrystalline Diamonds (PCD) are very heat and fracture resistant, making them a great coating removal tool. Uses PCD with Bar tooling is designed with  bar to prevent the deeper scratching and gouging while still aggressively removing the coatings. It is generally the PCD of choice during prep for a final polished floor or stained and sealed floor. Application PCD with Bar tooling is the fastest way to remove coatings over 2 mils in thickness without harsh chemicals or messy shot blasting. Both PCD’s (Double and Single Bar) stand up well to high heat and are fracture resistant. Grinding plate with 2 PCD-segments with one supporting segment. PCD segments for the removal of thermoplastic coatings. Paint and thin epoxy Plastic-like ceramic glues Porous cer glues  

Metallic Diamond Segment Edco For Concrete

Metallic Diamond Segment Edco For Concrete 6# Extremely aggressive low grit double bar used for extensive stock and rigid thick coating removal. Also an excellent tool for prepping a floor prior to applying an epoxy. 6#：Very aggressive low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 16#：Very aggressive medium – low grit double segment used to remove shaver lines, mastic’s, thin set, or floor prep floor coating adhesion. 30#：Aggressive medium grit double segment used for first cut    

Silicon Carbide Sandpaper Discs with Dust Holes

Silicon Carbide Sandpaper Discs with Dust Holes Suitable For: Orbital Sander Number of Items in Set: 100 Item Diameter: 5 inch/ 12.5 cm Size: 5" 6-Hole Application: Grinding/Sanding Ideal for refinishing or leveling old floors/wood floor Can be used to strip multiple layers of paint from floors Multiple grits available